_ WHO WE ARE
Customized clamps & VTB Family
Customized clamps
1. Selection & designing (Required parameters & conditions to be considered)
To meet specific application requirement, we need to develop the part as per customized specification. To design & develop the same following parameters are need to be considered;
- Operating pressure, vibrations & temp cycles
- Operating environment
- Application torque
- Hose & spigot geometry
- Bead geometry
- Hose compression ratio
- Type of charge to be handled
- Application industry-Automotive/food/etc.
VTB Family
1. What is the working principle of V Band Clamp?
V-Band clamp’s method of operation is based on principle of inclined plan (Wedging action). When the closure bolt is tightened, this exerts radial force on the V-profile segments. The two halves of the flange are pressed axially together by means of the V-Petal wedging action (see diagram below). The radial force that is exerted is converted into considerably higher axial force.
![principle of v band clamp](https://jollyclamps.com/wp-content/uploads/2023/12/principle-of-v-band-clamp.webp)