_ WHO WE ARE

Quality Assurance

At Jolly clamps, we are committed to using excellence as our standard in everything we do. To achieve this we:

Aliquam ac dui vel dui vulputate consectetur. Mauris accumsan, massa non consectetur condimentum,
Aliquam ac dui vel dui vulputate consectetur.
Aliquam ac dui vel dui vulputate consectetur. Mauris accumsan, massa non consectetur condimentum

Aliquam ac dui vel dui vulputate consectetur. Mauris accumsan, massa non consectetur condimentum, diam arcu tristique nibh, nec egestas diam elit at nulla. Suspendisse potenti. In non lacinia risus, ac tempor ipsum. Phasellus venenatis leo eu semper varius. Maecenas sit amet molestie leo. Morbi vitae urna mauris. Nulla nec tortor vitae eros iaculis hendrerit aliquet non urna. Nulla sit amet vestibulum magna, eget pulvinar libero.

Quality Control Equipment

No	Name of Instrument	Test Offered	Specification/Acceptance Criteria
1	Para Contamination Testing Machine	To check the Radioactive contamination in Incoming material	Measurement Range: 0-999.9 mR/hr No Radioactive contamination accepted
2	Spectrometer	To verify the Material Grade	As per ASTM Standard
3	PMI Testing Machine	To verify the Material Grade of WIP & finished component	As per ASTM Standard
4	Vickers Hardness Tester	To Check the surface Hardness of Sheet metal	1. Load Range: 0.5-50 Kg 2. Minimum thickness of material can be tested : 0.4mm 3. Hardness Range at 5Kg loading :- 31.08 - 1449 VPN
5	Rockwell Hardness Tester	To Check the surface Hardness of metal	Loading Range: 100Kg, 150 Kg
6	Universal Testing Machine (UTM)	To confirm yield strength, percentage of elongation and Ultimate Tensile Strength of specimen Test Offered- Compressive strength, Tensile strength, Shear strength	Max. Load Range: 0-100 KN
7	Cupping Test Machine	To assess the ductile properties of the metal. In this test, a punching force is applied to the metal sheet of thickness from 0.2mm to 2mm A visual inspection is done to see if the test material has developed any cracks or deformity.	Thickness from 0.2mm to 2mm.
8	Plating Thickness Measurement Machine	To measure Plating thickness	Range:- 0-30 micron Type of plating :- Zinc coating
9	Optical Comparator	To measure the liner, angular & diametrical dimensions of any component with great accuracy by taking co-ordinates from the machines	(Radius, angular, length with MSU 3D PRO software) Magnifying capacity: 10X, 20X, 100X
10	V Petal Contour Measurement Machine (SPM)	Analyse & confirms whether the V Petal under testing is complying given Depth, Angle, Inner Flat & Radius as per geometry & dimensions in Drawing	V Profile verification & acceptance (100W X 25Depth Max)
11	Spring Rate Testing	To Measure Spring Rate	Load range- 0-275 Kg
12	Variable Speed Variable Torque Nut Runner	To deliver the specified torque on the clamp using specified RPM	Torque Range- 3-12 Nm Speed Range- 120-400 RPM
13	Cobb Value Test Machine	To confirm resistance to absorption of water, oil or moisture in packing material	As per Standard ISO535
14	Busting Factor Testing Machine	GSM Testing of Packing material	Pressure: 0-40 Kg/Sq.cm
15	Fatigue Load Test Equipment (SPM)	1. Axial Load Test for V-Band clamp at Normal Temperature 2. Bending Load Test for V-Band Clamp at Normal Temperature 3. Torsional Load Test for V-Band Clamp at Normal Temperature 4. Axial Load Test for V-Band clamp at Elevated Temperature Bending Load Test 5. for V-Band Clamp at Elevated Temperature 6.Torsional Load Test for V-Band Clamp at Elevated Temperature 7. Water Splash Test	Temperature Range: 0-500° C
16	Burst Pressure Testing Machine (SPM)	Testing of maximum holding capacity of the flanges of V Band clamp at specified torque	Max. Hydraulic pressure that can be measured- 280 Kg/ Sqr.cm
17	Pulsating Pressure Endurance Test Machine (SPM)	To ensure the performance of clamp under fluctuating hydraulic or air Pressure (fatigue load) after tightening the clamp with installation torque	Pressure Range: 3.06-14 Kg/Sqr.cm
18	Vibration Testing Machine (SPM)	To validate the performance of clamp under Vibration condition after tightening the clamp at specified torque	Displacement in X direction only Displacement- 10 mm Max
19	Polar Tension Measurement Machine (SPM)	To Check Radial Clamping Force developed by the clamp at specified torque at 8 different segments	Max Load Capacity per Segment- 1000 kg
20	Belt Tension Measurement Machine (SPM)	To Measure Band Tension of a clamp at specified torque	Load Range 50kg to 5000 kg
21	Fatigue Testing of Spring/Washer (SPM)	To analyse performance of Belleville Washer, Helical Springs at fatigue load	Frequency- 68 cycles/Min Displacement- 4-12 mm Variable
22	Salt Spray Testing Machine	To Check Corrosion Resistance of Surface Coating	Standard Followed: ASTM B 117 PH value – 6.7 Flow rate- 30ml in 24 Hrs

Name of Instrument

1. Para Contamination Testing Machine

Test Offered

To check the Radioactive contamination in Incoming material.

Specification/Acceptance Criteria

Measurement Range: 0-999.9 mR/hr No Radioactive contamination accepted.

2. Spectrometer

Test Offered

To verify the Material Grade.

Specification/Acceptance Criteria

To verify the Material Grade.

3. PMI Testing Machine

Test Offered

To verify the Material Grade of WIP & finished component.

Specification/Acceptance Criteria

As per ASTM Standard.

4. Vickers Hardness Tester

Test Offered

To Check the surface Hardness of Sheet metal.

Specification/Acceptance Criteria

1. Load Range: 0.5-50 Kg
2. Minimum thickness of material can be tested : 0.4mm
3. Hardness Range at 5Kg loading :- 31.08 - 1449 VPN

_ WHO WE ARE

Quality Assurance